11Mbps Wireless Access Point

With the integration of a WLAN (IEEE 802.11b) Access Point, you can create a wireless network and connect wireless ready device to your existing LAN. Easy-to-use utilities are bundled with WLAN Access Point for configuration and monitoring purposes. WLAN networking can wirelessly transmit and receive data, minimizing the need for wired connections, at a speed of up to eleven megabit per second. With WLAN networking, you can locate your PC wherever you want without wires and cables. WLAN networking provides users with an access to real-time information anywhere in their organization. The mobility provides productivity and service, which are not available under wired networks.

Key Features:

• Provide Ethernet to Wireless LAN bridge fully compatible on Ethernet side and fully IEEE 802.3 compatible on the Ethernet side and fully interoperable with IEEE 802.11b compliant equipment
• Ethernet interface with 10BASE-T
• IEEE 802.11b Infrastructure and Ad-Hoc operating modes
• Dynamic date rate scaling at 11, 5.5, 2 and 1Mbps
• Allow auto fallback data rate for optimized reliability, throughput and transmission range
• Supports wireless data encryption with 128-bit WEP standard for security
• Dual diversity antennas for the multi-path environment
• Firmware upgrade capability via USB port
• Windows-based configuration tools and management
• Plug-and-Play

Product Specifications:

• Standards
  IEEE 802.11b
  IEEE 802.3
• Radio Technology
  IEEE 802.11b Direct Sequence Spread Spectrum (DSSS)
• Interface
  10BASE-T RJ-45 Ethernet
  B type USB connector for configuration
• Transmission Rate
  1, 2, 5.5, 11Mbps (auto sense)
• Receiver Sensitivity
  11Mbps: Typical -84dBm @ 8% PER (Packet Error Rate)
  2Mbps: Typical -90dBm @ 8% PER (Packet Error Rate)
• Wireless LAN Frequency Range
  2400 ~ 2497 MHz ISM band (channels 1 ~ 14)
• Modulation Schemes
  DBPSK/DQPSK/CCK
• Media Access Protocol
  CSMA/CA with ACK
• Transmit Power
  Minimum 13dBm typically
• Channel
  USA: 11
  Europe: 13
  Japan: 14
• Security
  64/128-bits WEP Encryption
• Range Coverage
  Indoor: 50 ~ 100 meters (depends on environment)
  Outdoor: 100 ~ 300 meters (depends on environment)
• Roaming
  Full mobility and seamless roaming from cell to cell
• Antenna
  GAIN: 2dBi
  Connector: Reverse SMA Connector, Female (WLB-2001)
  Frequency: 2.4 ~ 2.5 GHz
  Radiation: Omni-directional
• Continuous Current Consumption
  250mA typ. for receive mode
  450mA typ. for transmit mode
• Diagnostic LEDs
  Power & LAN & WLAN
• Dimensions (W x H x D)
  139.5 x 114.5 x 29.4 mm (without antenna)
• Operation Temperature
  0 ~ 55 ¢XC
• Storage Temperature
  25 ~ 70 ¢XC
• Humidity
  10% ~ 95% RH, no condensation
• Certifications
  FCC Part 15.247 for US
  ETS 300 328 for Europe
  ARIB STD-T66 for Japan