New Page 1
DC-395UW
Ultra-Wide SCSI Host Adapter -
PCI 2.1 compliant with full Plug & Play
readiness.
 |
Flash BIOS |
 |
High speed 32-bit
PCI bus master DMA transfers up to 133MB/sec in burst mode |
 |
Max Xfer Rate
Supported is 40MB/S |
 |
Maximum devices
supported are 15 |
 |
Level triggering
allows interrupt sharing between multiple adapters |
| Technical
Specifications: |
| SCSI
Chip: |
- Tekram S1040 Ultra SCSI Processor
|
| SCSI
devices: |
- DC-395UW supports a maximum of 15 devices. SCSI-2, Wide
SCSI, Ultra SCSI, Ultra-Wide SCSI devices are supported
|
| SCSI
bus transfers: |
- Async: 5MB/sec & Sync: 40MB/sec
|
| Data
transfers: |
- 133MB/sec (at 33MHz)
- 80-byte DMA FIFO for 2/4/8/16 dwords burst (PCI)
|
| PCI
Integration: |
- Full 32-bit PCI DMA bus master
- Jumper-less design
- Automatic SCSI bus termination
|
| SCSI
BIOS: |
- DC-395UW Adapters are equipped with Tekram FLASH BIOS to
allow SCSI boot devices
|
| Drivers
& Utilities: |
- Flash utility, Installation, Low Level Format
- SCO 3.2v4.2/5.0, UnixWare 2.X, OS/2 Warp, DOS, Win3.1,
Win95, NT 3.5X/4.X, Netware 3.X/4.X
|
| Connectors: |
- (1) 50-Pin Ultra SCSI Internal
- (1) 68-Pin Ultra-Wide SCSI Internal
- (1) 50-Pin Ultra SCSI External
|
| System
Requirements: |
- 1 free PCI Slot
- Plug & Play BIOS on mainboard recommended
|
|